Fiber Tronix FT-FOTR-16VD-ST-S Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Fiber Tronix FT-FOTR-16VD-ST-S. Fiber Tronix FT-FOTR-16VD-ST-S 5 pages. 16-channel digital duplex baseband video transmitter and receiver with reverse data transmission for ptz cameras

Imprimer la page
This package contains:
One each FT-FOTR-16VD-ST-S 16-channel baseband video transmitter and receiver
Two 5VDC power supplies
One installation manual
The FT-FOTR-16VD-ST-S fiber optic transmitter/receiver supports the transmission of sixteen
baseband video channels and a single reverse data signal over one strand of single-mode fiber
optic cable. This product is compatible with all NTSC and PAL video signals. Power, optical signal,
video signal and data signal are easily inspected through LED indicators directly on the units. The
transmitter and receiver combination supports transmission distances for optical loss budgets of
less than 18 dB.
FT-FOTR-16VD-ST-S
Specifications (Typical)
1. Optical Wavelength
2. Fiber Type
3. Maximum Link Distance
4. Connector
5. Acceptable Loss Budget
6. Number of Video Inputs
7. Video Connector
8. Transmitter Input Impedance
9. Receiver Output Impedance
10. Video Bandwidth per Channel
11. Video SNR
12. Differential Gain
13. Differential Phase
14. Tilt
15. Data Rate
16. Data Connector
17. Data Interface
18. Baud Rate Per Channel
19. Bit Error Rate
20. Power Supply
21. Power Consumption
22. Operating Relative Humidity
23. Operating Temperature
24. Dimensions
25. Weight
v1.0 4/5/11

PACKAGE CONTENTS

PRODUCT DESCRIPTION

SPECIFICATIONS

1310nm / 1550nm
Single-mode 9/125µm
12.5 miles
Simplex ST
18 dB
16
BNC Female
75Ω unbalanced
75Ω unbalanced
0Hz – 6.5MHz
>60 dB
<1%
<1°
<1%
0 – 300Kbps
Terminal Block
RS485, RS422 or RS232
0 – 100Kbps
-9
<10
5VDC
<10W
0 – 95% non-condensing
14F – 122F
9.1"x8.2"x2.2" per unit
2.6 lb. per unit
2