Sharp 13K-M150 Manuel d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sharp 13K-M150. Sharp 13K-M150 24 pages.

13K-M100/150

CK13M10/15

For adjustments of this model, the bus data is convered to various analog signals by the D-A converter

circuit.

Note: There are still a few analog adjustments in this series such as focus and master screen voltage.

Follow the steps below whenever service adjustment is required. See Figure "B" to determine if service

adjustments are required.

1.Service mode -

Before putting unit into the service mode, check, that

customer adjustments are in the normal mode. use

the reset function in the video adjust menu to ensure

customer controls are in their

2.Service number selection

Once in the service mode, press the channel up or

channel down button on the remote transmitter or at

the set. the service adjustment number will vary in

increments of one, from "S01" to "S19".

Select the item you wish to adjust.

3.Data number selection

Press the volume up or down button to adjust the

data number.

SERVICE ADJUSTMENT NUMBER

To enter the service mode .

While Pressing the Vol-up and Ch-up buttons at

once,plug the AC cord into a wall socket.Now the TV

set is switched on and enters the service mode.

To exit the service mode, shut the television off by

pressing the power button.

DATA NUMBER

(HEX )

(HEXADEC:MAL)

DA1A NUMBER

(DEC)

(DECIMAL)

S01

S01 D:00

Figure B.