Sharp 21LF-90H Manuel d'utilisation - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp 21LF-90H. Sharp 21LF-90H 35 pages. Typical connections
Également pour Sharp 21LF-90H : Manuel de connexion (4 pages), Manuel d'utilisation (34 pages), Manuel d'utilisation (34 pages), Manuel de démarrage rapide (4 pages)
Imprimer la page
Press button to decrease hue level.
Center value is indicated with the two recip-
rocal arrows.
Mode
This item is used to change the picture size.
By pressing
choose one
4:3, 16:9 and AUTO.
4:3 This option forces the picture ratio to 4:3
16:9 This option forces the picture ratio to
AUTO
WSS feature is only used in TV and FAV
modes. For the Picture Mode selection in
AV1 the pin 8 (of Scart) value is used. In
RGB modes the Picture Mode can be 4:3 or
16:9 (Auto mode is not available.).
Note:
In the Picture menu if you press Flashback
(
selves to the factory settings.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65
Downloaded from:
http://www.usersmanualguide.com/
or
button you may
of
three options. These are,
mode.
16:9 mode.
Your TV changes
the picture mode
automatically, according to the transmission
of the selected channel. For example, your
TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the
AUTO mode, the TV is switched to 16:9
mode automatically. If the TV is in 4:3 mode
and the picture ratio of the channel is also
4:3, there will be no affect selecting the pic-
ture mode to AUTO mode.
) button the adjustments switch them-
14
To Store the Settings
Press or button on STORE option to
store Picture menu settings.
The stored picture mode setting will be valid
only in current program. However, the other
stored values in Picture Menu will be valid
for all the programmes.
Feature Menu
To enter the Feature menu directly, press the
YELLOW button, or
Press M button, now you are in Main
menu. In the Main menu, select FEATURE
using
or
button. Then enter the
Feature menu pressing or button.
Sleep Timer
As you enter the Feature menu, SLEEP
TIMER will be the first selected option. Use
or button to change the Sleep Timer
values between OFF, 0:15:00, 0:30:00,
0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00
and 2:00:00.
It is displayed on the upper right of the
screen. If sleep timer is activated it is dis-
played with the TV status and erased with it
after 3 seconds.
TG@@QÃUDH @S
PAA
8CDG9ÃGP8F
PAA
G6IB V6B@
@IB GDTC
- 14 -
06.01.2004, 15:37