Crestron TMK-12L Manuel d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Crestron TMK-12L. Crestron TMK-12L 16 pages. Trim ring mount kits
Également pour Crestron TMK-12L : Manuel d'installation (12 pages)
Imprimer la page
Crestron TMK-12L & WMKT-12L
Installation Guide – DOC. 6360A
4. Insert the trim ring into the opening, as shown in the illustration below.
Insert Trim Ring into Opening
NOTE: MAKE DRYWALL CUTOUT AS
LEVEL AND CLEAN AS POSSIBLE. THE
TRIM RING ONLY ALLOWS MINOR
ADJUSTMENTS OF THE CONTROLLER.
5. Carefully pass the mounting plate through the opening and hold it against
the interior surface of the drywall.
6. When the mounting plate is in position, bend the top two flanges of the trim
ring upward (approximately 90 degrees) and the bottom two flanges
downward (approximately 90 degrees). Refer to the illustration on the
following page.
NOTE: The mounting plate will have a slight play; this is normal. It allows for
minor adjustments to the touchpanel during installation.
Trim Ring Mount Kits
DRYWALL
TRIM RING
(2013001)
Trim Ring Mount Kits: TMK-12L & WMKT-12L • 7
MOUNTING PLATE
(2012963)