DIGISYSTEM DSC-302SMD Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DIGISYSTEM DSC-302SMD. DIGISYSTEM DSC-302SMD 3 pages. Digital centrifuge
Imprimer la page
5. Push the button
to set the time value. Push the button
6. After setting parameters, push the button
the button
remaining time or RCF value on the RCF/TIME display screen.
7. Push the button
immediately. The centrifuge will run to the current speed setting value.
8. Under the conditions of power failure or the open function failure, please insert the "Emergency Bar"
into the hole at right hand side of centrifuge to force the lid open.
Maintenance and care:
1. Keep the centrifuge clean all the time. Cleaning can be done with a damp cloth. Avoid the use of
solvents as they may damage the product housing, rotor.
2. Check if the rotor is in the center. In case, the rotor is slanted. Stop using machine and contact the
distributor for repair.
Circuit Diagram
DIGISYSTEM LABORATORY INSTRUMENTS INC.
, the time value is flash on the screen. Push the button
to stop the centrifuge. During operation, you can pus the button
to start the centrifuge directly. Release the button and the centrifuge will stop
or any other function button to enter the time value.
to start the centrifuge. During operation, you can push
Service Manual
www.digisystemlab.com
or
or
to switch the
REV.1-2021