Sharp CD-BA250H Manuel d'utilisation - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-BA250H. Sharp CD-BA250H 42 pages. Mini component system
Également pour Sharp CD-BA250H : Manuel d'utilisation (5 pages), Manuel rapide (4 pages)

Imprimer la page

1. Speaker System

„ To recall stations in memory

To specify programmed types and select stations (PTY search):

You can search a station by specifying the programme type (news, sports, traffic pro-

gramme, etc. ... see page 19) from the stations in memory.

Press the TUNER (BAND) button to select the FM.

Press the PTY.TI SEARCH button.

"PTY TI" and "SELECT" will appear alternately for about 6 seconds.

Within 6 seconds, press the

button to select the programme type.

Each time the button is pressed, the programme type will appear. If the button is

held down for more than 0.5 seconds, the programme type will appear continu-

ously.

Whilst the selected programme type is flashing (within 4 seconds),

press the PTY.TI SEARCH button again.

After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-

pear, and the search operation will start.

PRESET

Notes:

z If the display has stopped flashing, start again from step 2. If the unit finds out a

desired programme type, corresponding channel number will flash for about 4 sec-

onds, and then the station name will flash for 7 seconds, and then will remain lit.

z If you want to listen to the same programme type of another station, press the

PTY.TI SEARCH button whilst the channel number or station name is flashing. The

unit will look for the next station.

z If no station can be found, "NOT FOUND" will appear for 4 seconds.

If you select the traffic programme:

If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not

mean that you can listen to the traffic information at that time.)

When a traffic information is broadcast, "TA" will appear.

To specify station names and select stations manually:

You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the sta-

tions stored in memory.

Before starting this operation, you must store one or more station names in memory.

Press the TUNER (BAND) button to select the FM band.

Press the

PRESET

tion.

The station name will be displayed for 6 seconds. Then the display will change as

follows.

PRESET

button to select a desired sta-

ENGLISH

E-21