Sharp CD-DP2500H Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-DP2500H. Sharp CD-DP2500H 37 pages. Mini component system
Imprimer la page
(Continued)
(Main unit operation)
(Main unit operation)
2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar)
Batteries are not included.
Downloaded from:
http://www.usersmanualguide.com/
0.2 m - 6 m
(8" - 20')
Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode),
press the X-BASS/DEMO button.
The demonstration mode will be cancelled and the unit will
be in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO
button again.
Notes:
When the unit is in the low power consumption mode, the
display will disappear.
When the power is on, the X-BASS/DEMO button can be
used to select the extra bass mode.
To change the brightness of the display
Press the DIMMER button.
The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
When bright
When dark
Remote control
When inserting or removing the batteries, push them towards
the ë battery terminals.
Installing the batteries incorrectly may cause the unit to
malfunction.
Precautions for battery use:
Insert the batteries according to the direction indicated in
the battery compartment.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not
be used for long periods of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Notes concerning use:
Replace the batteries if the operating distance is reduced or
if the operation becomes erratic.
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direction
of the unit.
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
10