Sharp CD-E66 Manuel d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sharp CD-E66. Sharp CD-E66 44 pages.

Imprimer la page

CD-E600/CD-E66

Caution on Disassembly

Follow the below-mentioned notes when disassembling

the unit and reassembling it, to keep it safe and ensure

excellent performance:

1. Take cassette tape and compact disc out of the unit.

2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing

the unit, be sure to rearrange the leads where they were

before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

CD-E600/CD-E66

REMOVAL

STEP

Top Cabinet

1. Screw ...................... (A1) x4

Side Panel

1. Screw ...................... (B1) x8

(Left/Right)

CD Tray Cover/

1. Turn on the power supply, ..

CD Player Unit

2. Screw ...................... (C1) x1

3. Hook ........................ (C2) x3

4. Hook ........................ (C3) x2

5. Socket ..................... (C4) x2

Rear Panel

1. Screw ...................... (D1) x7

Main PWB

1. Screw ...................... (E1) x4

2. Socket ..................... (E2) x4

3. Flat Cable ............... (E3) x1

4. Flat Wire .................. (E4) x1

Front Panel

1. Screw ....................... (F1) x2

2. Hook ......................... (F2) x2

3. Flat Wire ...................(F3) x1

Display PWB

1. Screw ...................... (G1) x9

2. Flat Cable ............... (G2) x1

Tape Mechanism 1. Open the cassette holder. ..

2. Screw...................... (H1) x5

Headphones PWB 1. Screw ....................... (J1) x1

Turntable

1. Hook ........................ (K1) x2

2. Cover ...................... (K2) x1

Loading Tray

1. Turn fully the lock lever in the .

2. Push the loading tray backward

CD Servo PWB

1. Screw ...................... (M1) x2

(Note 2)

2. Hook ........................ (M2) x1

3. Socket ..................... (M3) x4

CD Mechanism

1. Hook ........................ (N1) x2

2. Hook ........................ (N2) x2

Note 1: How to open the changer manually. (Fig. 6-3)

1. In this state, turn fully the lock lever in the arrow direction through

the hole on the loading tray bottom.

2. After that, push forward the Loading tray.

Note 2:

1. After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the front end

of the connector so as to protect the optical pickup from electro-

static damage.

Note 3:

1. Be careful not to break the claw of the CD mechanism.

2. When fining back the cam gear assembly, let it lock by front

movement.

PROCEDURE

open the disc tray, take out

the CD tray cover, and close.

(Note 1)

arrow direction.

to engage the claw with the

groove and remove it in the

direction of the arrow. .. (L1) x6

DISASSEMBLY

CD-E600/CD-E66

(A1)x2

ø3x12mm

Side Panel

(Right)

(B1)x2

ø3x10mm

FIGURE

6-1

(B1)x4

ø3x10mm

6-2

6-2, 7-1

7-1

(C3)x1

7-1

Pull

7-2

Rear

7-2

Panel

(C1)x1

7-2

ø3x10mm

7-3

6-3

7-4

7-5

7-6

Lock Lever

CD Player Unit

(Bottom View)

– 6 –

Top Cabinet

Rear

Panel

Figure 6-1

(C4)x2

CD Servo

PWB

(D1)x6

(E1)x1

ø3x10mm

Figure 6-2

Figure 6-3

Front

Panel

(A1)x2

ø3x12mm

Side Panel

(Left)

(B1)x2

ø3x10mm

CD Tray Cover

(C2)x3

CD Player

Unit

(C3)x1

Main PWB

Lug Wire

(E1)x1

ø3x10mm

(D1)x1

ø3x10mm