Sharp CD-G10000 Manuel d'utilisation - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-G10000. Sharp CD-G10000 47 pages. Mini component system

Timer and sleep operation

CD-G10000
CP-G10000S
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at a preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer:
Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a ra-
dio station.
Daily timer:
Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1 Set the daily timer (pages 36 - 38).
2 Set the once timer (pages 36 - 38).
1 minute or more
Daily timer
Start
Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
36
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 19).
2 For timer playback: Load a cassette or discs to be played.
1
2
3
Once timer
Start
Stop
Timer playback or timer recording
If it is not set, you cannot use the timer function.
For timer recording: Load a cassette for recording in the
TAPE 2 cassette compartment.
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
or
button to se-