Sharp CD-G100000 Manuel d'utilisation - Page 38

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-G100000. Sharp CD-G100000 47 pages. Mini component system

Imprimer la page

Timer and sleep operation (continued)

CD-G10000

CP-G10000S

When the preset time is reached, playback or recording will

start.

The volume will increase gradually until it reaches the preset

volume.

When the timer end time is reached, the system will enter

the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer will operate at the same time every day. It will contin-

ue until the daily timer setting is canceled. Cancel the daily timer

when it is not in use.

Note:

When performing timer playback or recording using another unit con-

nected to the GAME INPUT jacks, select "GAME" in step 9.

This unit will turn on or enter the power stand-by mode automatically,

however, the connected unit will not turn on or off.

Checking the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE CALL" or "DAILY CALL", and press the MEMORY/SET

button.

The unit returns to the timer stand-by mode after displaying the

settings in order.

Canceling the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-

ton.

Timer will be canceled (the setting will not be canceled).

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the

same setting, perform the following operations.

1 Turn the power on and press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.

4 Press the ON/STAND-BY button to enter the power stand-by

mode.

Note:

The timer can also be set with the remote control.

button to select