Sharp CD-SW300H Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-SW300H. Sharp CD-SW300H 48 pages. Mini component system
Également pour Sharp CD-SW300H : Manuel d'utilisation (48 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
System connections (continued)
CD-SW300H
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM
75 OHMS socket and position the FM
aerial wire in the direction where the
strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM
and EARTH (GND) terminals. Position
the AM loop aerial for optimum
reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
Speaker connection
FRONT SPEAKERS:
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
SUBWOOFER:
Connect the black wire to the SUBWOOFER minus (-) terminal, and
the red wire with purple insulation tube to the SUBWOOFER plus (+)
terminal.
AC INPUT
10
1. Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
AM loop
FM
aerial
aerial
ANTENNA
FM
GND
AM
75 OHMS
Note:
Placing the right speaker light-up wire to the RIGHT socket and the
left speaker light-up wire to the LEFT socket.
2. Connect the subwoofer light-up wire to the SUBWOOFER
< Attaching to the wall >
Wall
Screws (not supplied)
Caution :
Purple
Red
Black
14/2/06
Speaker Light-Up connection
sockets for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control
for 2 seconds or more.
LEFT SPEAKER
AC INPUT
LIGHT-UP socket.
AC INPUT
Never mistake the FRONT SPEAKERS and the SUBWOOFER
terminals. The unit or the speakers may be damaged.
If you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 6 ohms,
Subwoofer: 12 ohms.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not stand or sit on the speakers. You may
be injured.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
CD-SW300HA_EN.fm
RIGHT SPEAKER
SUBWOOFER
Incorrect
TINSZA165AWZZ