Sharp CD-XP120W Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp CD-XP120W. Sharp CD-XP120W 32 pages.

System connections (continued)

CD-XP120W

ENGLISH

230V

240V

E-9

! Setting the AC voltage selector

Check the setting of the AC voltage selector located on the rear

panel before plugging the unit into a wall socket. If necessary, adjust

the selector to correspond to the AC power voltage used in your

area.

Turn the selector with a screwdriver until the appropriate volt-

age number appears in the window (110 V, 127 V, 220 V or 230

V - 240 V AC).

! Connecting the AC power lead

After checking all the connections have been made correctly, con-

nect the AC power lead to the AC power input socket, then plug the

AC power lead of this unit into the wall socket. If you plug in the unit

Wall socket

first, the unit will enter the demonstration mode (see page 10).

Notes:

" Unplug the AC power lead from the wall socket if the unit will not

be in use for a prolonged period of time.

" Never use a power lead other than the one supplied. Otherwise,

(230 - 240 V, 50/60 Hz)

a malfunction or an accident may occur.

02/5/27

CD-XP120W(A)1.fm