Sharp XL-UH25H Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp XL-UH25H. Sharp XL-UH25H 36 pages.

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket and position

the FM aerial wire in the direction where the strongest signal can be

received.

Note:

Placing the aerial on the unit or near the AC power lead may cause

noise pickup. Place the aerial away from the unit for better reception.

Speaker connection

Connect the black wire to the minus (–) terminal, and the red wire to

the plus (+) terminal.

Red

Black

Caution:

Use speakers with an impedance of 8 ohms or more, as lower

impedance speakers can damage the unit.

Do not mistake the right and the left

channels. The right speaker is the one on the

right side when you face the unit.

Do not let the bare speaker wires touch

each other.

Do not allow any objects to fall into or to be

placed in the bass reflex ducts.

Do not stand or sit on the speakers. You may be injured.

Using antislip speaker cushions

You can install the speakers either vertically or horizontally. Affix the

cushions (supplied) to the bottom of the speakers to prevent them

from sliding or falling due to vibration.

(Vertical position)

A sheet of speaker cushions (8 pcs) is supplied with this product. Use

4 cushions per speaker.

Incorrect

(Horizontal position)

XL-UH25H