Sharp 1217 series Manuel en ligne - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel en ligne pour {nom_de_la_catégorie} Sharp 1217 series. Sharp 1217 series 37 pages.

Check Your Computer

Reference:

Plug and Play Screen does not Appear (when the USB is connected)

CHECK1

Is there enough computer memory or hard

disk space?

To use this unit, you must have an adequate

amount of hard disk space. If there is insufficient

hard disk space, delete unnecessary files to

increase the free space of the hard disk. If there is

insufficient memory, close unnecessary applications

to increase memory available for printing or

scanning. If you are still unable to print or scan,

install more memory into your computer.

CHECK2

Is your hard disk fragmented?

When data is frequently stored/deleted, the hard

disk may become fragmented causing a reduction

in printing or scanning speed. In this case it is

recommended to defragment your hard disk. You

may use the Windows tools or a commercially

available hard disk defragmenting tool.

CHECK3

If your computer is connected to the unit

through the parallel port, is the parallel port

(LPT) mode set to other than EPP mode?

The unit may not operate correctly if the parallel

port mode is set to EPP mode. To set the parallel

port mode to a mode other than EPP mode, refer to

your computer manual or ask the manufacturer of

the computer. ECP mode is recommended to obtain

the best performance from the unit. Note that some

computers may use different names for the modes.

If you are using Windows XP, the "Found New

Hardware Wizard" may appear after you change

the port setting. In this case, click the "Cancel"

Caution

button to close the wizard, and then reinstall the

printer driver as explained in "INSTALLING THE

SOFTWARE" in the Operation Manual.

CONTENTS

INDEX