Sharp Advanced MXM465N Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Sharp Advanced MXM465N. Sharp Advanced MXM465N 28 pages. Digital multifunctional system
Également pour Sharp Advanced MXM465N : Spécifications (8 pages), Manuel rapide (8 pages), Manuel de démarrage rapide (28 pages), Spécifications (8 pages)

Imprimer la page

Sharp Advanced MXM465N Manuel de démarrage rapide

Installation notes

Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can

withstand the weight of the machine.

Risk of injury due to the machine falling or toppling.

If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise

unstable surface. Danger of slippage, falling, and toppling. Install the product on a flat, stable surface that can

withstand the weight of the product.

Do not install in a location with moisture or dust.

Risk of fire and electrical shock.

If dust enters the machine, dirty output and machine failure may result.

Locations that are excessively hot, cold, humid, or dry

(near heaters, humidifiers, air conditioners, etc.)

The paper will become damp and condensation may form

inside the machine, causing misfeeds and dirty output.

SPECIFICATIONS (page 18)

If the location has an ultrasonic humidifier, use pure water

for humidifiers in the humidifier. If tap water is used, minerals

and other impurities will be emitted, causing impurities to

collect on the inside of the machine and create dirty output.

When the machine is installed, the adjusters (4) must be lowered to the

floor to secure the machine (prevent it from moving).

Rotate the adjusters in the locking direction until they are in firm contact

with the floor.

If you find it necessary to reposition the machine due to

rearrangement of your office layout or other reason, retract the

adjusters from the floor, turn off the power, and then move the

machine.

(After moving the machine, lower the adjusters again to secure the

machine.)

Locations exposed to direct sunlight

Plastic parts may become deformed and dirty output may result.

CAUTION

Locations with ammonia gas

Installing the machine next to a diazo copy machine may cause

dirty output.

Do not install the machine in a location with poor air

circulation.

A small amount of ozone is created inside the machine during

printing. The amount of ozone created is not sufficient to be

harmful; however, an unpleasant odor may be noticed during

large copy runs, and thus the machine should be installed in a

room with a ventilation fan or windows that provide sufficient air

circulation. (The odor may occasionally cause headaches.)

* I nstall the machine so that people are not directly exposed to

exhaust from the machine. If installed near a window, ensure

that the machine is not exposed to direct sunlight.

Near a wall

Be sure to allow the required space around the machine for

servicing and proper ventilation. (The machine should be no

closer than the distances indicated below from walls. The

indicated distances are for the case when a saddle finisher and

large capacity paper tray are not installed.)

Locations subject to vibration.

Lock

Release

Vibration may cause failure.

CAUTION

The machine includes a built-in hard drive. Do not subject the machine to shock or vibration. In particular, never

move the machine while the power is on.

• The machine should be installed near an accessible power outlet for easy connection.

• Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is

connected to the same outlet, the light may flicker.

30 cm

45 cm