Sharp AL-1530CS Manuel en ligne - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel en ligne pour {nom_de_la_catégorie} Sharp AL-1530CS. Sharp AL-1530CS 37 pages. Sharp al-1530cs: user guide
Également pour Sharp AL-1530CS : Manuel d'entretien (6 pages)
Imprimer la page
4
Nothing Prints
If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process
intricate data. If the unit still does not print, refer to the check list below.
CHECK1
Has a paper jam occurred?
When the misfeed (
blinks in the display, the unit will stop because of a
misfeed.
Remove the jammed paper as explained in
"MISFEED REMOVAL" in the Operation Manual.
CHECK2
Is the ONLINE indicator off?
The ONLINE indicator on the operation panel turns
off while the unit is used for copying. Printing is not
possible at this time. When copying is finished, the
ONLINE indicator will turn on after the set auto
clear time elapses, and the unit will be ready for
printing. You can also press the clear (
twice or press the ONLINE key to make the unit
ready for printing.
CHECK3
Is your unit selected correctly in the current
application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected "SHARP AL-
XXXX" (where XXXX is the model name of your unit)
printer displayed in the "Print" dialog box.
) indicator blinks or (
) key
Check here.
CHECK4
Has the printer driver been installed
)
properly?
Check if the printer driver has been installed, following
the steps listed below.
1
Click the "start" button, click "Control Panel",
click "Printers and Other Hardware", and then
click "Printers and Faxes".
On Windows 95/98/Me/NT 4.0/2000, click the "Start"
button, select "Settings" and then click "Printers".
2
Check if the "SHARP AL-XXXX" (where XXXX is
the model name of your unit) printer driver icon
is shown.
If you still cannot print after confirming the "SHARP
AL-XXXX" (where XXXX is the model name of your
unit) printer driver icon, the printer driver may not
have been installed correctly. In this case, delete
SHARP Personal MFP series software and then
reinstall it.
Reference:
Uninstalling SHARP Personal MFP Series
Software
CONTENTS
INDEX
30