Sharp AR M277 - B/W Laser - Copier Manuel en ligne - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel en ligne pour {nom_de_la_catégorie} Sharp AR M277 - B/W Laser - Copier. Sharp AR M277 - B/W Laser - Copier 36 pages. Digital multifunctional system
Également pour Sharp AR M277 - B/W Laser - Copier : Manuel de configuration du logiciel (18 pages)
Imprimer la page
3
TROUBLESHOOTING
Printing does not take place
Check Your Computer
I I I I Is there enough computer memory or hard disk
space?
To use the machine, your computer must have sufficient
memory and hard disk space. If there is insufficient hard disk
space, delete unnecessary files to increase the free space of
the hard disk. If there is insufficient memory, close
unnecessary applications to increase memory available for
printing.
CONTENTS
I N D E X
I I I I If your computer is connected to the machine
through the parallel port, is the parallel port (LPT)
mode set to other than EPP mode?
The machine may not operate correctly if the parallel port
mode is set to EPP mode. To set the parallel port mode to a
mode other than EPP mode, refer to your computer manual
or ask the manufacturer of the computer. ECP mode is
recommended to obtain the best performance from the
machine. Note that some computers may use different
names for the modes.
If you are using Windows XP, the "Found New Hardware
Note
Wizard" may appear after you change the port setting. In
this case, click the "Cancel" button to close the wizard,
and then reinstall the printer driver as explained in
"INSTALLING THE SOFTWARE" in the software setup
guide.
(part 2)
26