Sharp AR-5420 Manuel d'utilisation - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp AR-5420. Sharp AR-5420 44 pages. Digital laser copier
Imprimer la page
Program
No.
1
Auto clear time
2
Preheat mode
Auto power shut- off
3
mode
Auto power shut- off
4
timer
Resolution of AUTO
10
& MANUAL mode
21
Reset factory
Copy effective paper
25
width setting function
(Bypass tray)
Copy effective paper
26
width setting function
(Tray 1)
Selection of copy
28
start state (Polygon
rotation on/off)
Fusing temperature
29
setting when the
bypass tray is used
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
To change the setting or to set another mode, press the clear
(
6
Press the light (
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press and hold down the clear (
total number of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
Mode
1
4
*1
4
7
*1
*1
4
*1
1
*1
2
*1
2
*1
1
) key. The right-hand number in the display
) key. The unit will return to step 2.
) to return to the normal copy mode.
) key for approximately 5 seconds. The
Parameters
10 sec., 2
30 sec., *3
90 sec., 5
120 sec., 6
30 sec., 2
60 sec., 3
30 min., 5
60 min., 6
240 min.
ON, 2
OFF
5 min., 2
30min., 3
120 min., 5
240 min.
300dpi, 2
600dpi
YES, *2
NO
Large (A4 width),
Small (B5R width)
Large (A4 width),
Small (B5R width)
ON, 2
OFF
Low, *2
High
60 sec.,
OFF
5 min.,
120 min.,
60 min.,
4
21