Sharp AR-5520D Manuel de démarrage - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Sharp AR-5520D. Sharp AR-5520D 32 pages. Digital multifunctional system
Imprimer la page
9
The printer or printers connected to
the network will be detected. Click the
printer to be configured (the machine)
and click the "Next" button.
If a message appears regarding the Windows
firewall, click the "Yes" button.
• The "Ethernet Address" is indicated on the
Note
left side of the machine near the LAN
connector.
• If the machine can not be recognised, enter
the Ethernet Address and click the
"Initialize" button to initialise the IP address.
Follow the on-screen instructions to click
the "OK" button and then the "Search"
button. If the machine is still not recognised,
disable your computer's firewall and then
repeat the installation from the beginning.
10
Enter the IP address, subnet mask,
and default gateway.
The settings in the window below are examples.
Be sure to ask your network administrator for the
correct IP address, subnet mask, and default
gateway to be entered.
When "Get IP Address Automatically" is
selected, the IP address may at times change
Note
automatically. This will prevent printing. In this
event, select "Assign IP Address" and enter
the IP address.
11
Click the "Next" button.
12
When the "Finish" screen appears,
click the "Close" button.
This completes setting the IP Address.
• To install all of the software, go to "Install all of
the software" (p.14).
• To install particular packages, go to "Choose
the option you want to install" (p.15).
SETUP
13