Sharp AR-C260 Opérations du scanner de réseau - Page 6

Parcourez en ligne ou téléchargez le pdf Opérations du scanner de réseau pour {nom_de_la_catégorie} Sharp AR-C260. Sharp AR-C260 42 pages. Color adjustment
Également pour Sharp AR-C260 : Manuel de l'opérateur de la clé (19 pages), Manuel d'utilisation de l'imprimante (50 pages), Manuel d'installation du logiciel (25 pages), Manuel de gestion des couleurs (8 pages), Manuel d'installation (15 pages), Manuel de l'utilisateur (8 pages)

Imprimer la page
Sharp AR-C260 Opérations du scanner de réseau
SETTINGS AND PROGRAMMING REQUIRED
FOR THE NETWORK SCANNER FEATURE
To use the Network Scanner feature, settings for the E-mail server, DNS server, and destination addresses must be
established.
To establish the settings, use a computer that is connected to the same network as the machine to access the
machine's Web page. The Web page can be displayed with your Web browser (Internet Explorer 4.0 or later, or
Netscape Navigator 4.0 or later).
ACCESSING WEB PAGES
Use the following procedure to access the Web pages.
1
Open the Web browser on your computer.
Supported browsers:
Netscape Navigator 4.0 or later
Internet Explorer 4.0 or later
ABOUT THE WEB PAGE
When you access the Web page in the machine, the following page will appear in your browser.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right
frame that allows you to establish settings for that item.
For overviews of each of the menu items, refer to chapter 3 of "Operation manual (for printer)".
For detailed explanations of the procedures for establishing settings, click "Help" in the menu frame.
Menu frame
Click the menu items displayed
here to configure the
corresponding settings.
Edit and delete stored
transmission destinations.
Store various types of
transmission destinations.
Configure basic settings for the
network scanner function.
Some transmission methods
require that the E-mail server
and DNS server settings be
configured.
Store the sender's name and E-
mail address for Scan to E-mail.
To use the network scanner function, you must configure basic network scanner settings
transmission destinations
(pages 7 -
11), and program your sender's name
TABLE OF CONTENTS
2
In the "Address" field of your Web browser,
enter the IP address of the machine as a
URL.
When the connection is completed, the following
Web page will appear in your Web browser.
Web Page
(page
12).
4
Input the IP address
previously specified in
this product.
If you do not know the IP
address, see
page
34.
(pages 5 -
6), store