Sharp AR-C260 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Sharp AR-C260. Sharp AR-C260 8 pages. Color adjustment
Également pour Sharp AR-C260 : Opérations du scanner de réseau (42 pages), Manuel de l'opérateur de la clé (19 pages), Manuel d'utilisation de l'imprimante (50 pages), Manuel d'installation du logiciel (25 pages), Manuel de gestion des couleurs (8 pages), Manuel d'installation (15 pages)

Using Easy Calibration

Use Easy Calibration when there is only a small difference between the colors in the color chart and the

test page printed as explained on page 3.

Follow the steps below to perform Easy Calibration using the operation panel.

Enter the key operator programs.

To enter the key operator programs, see "Using

the key operator programs" on page 3 of the Key

Operator's Guide.

Touch the [PRINTER SETTINGS] key.

Touch the [COLOR ADJUSTMENTS] key.

Touch the [EASY CALIBRATION] key.

Load A4 or letter-size paper in the tray and

touch the [EXECUTE] key.

When the [EXECUTE] key is touched, "SELF

PRINT IN PROGRESS" appears in the display.

After a brief interval, the test patterns for Easy

Calibration will be printed. (see the following

page).

Select the gray color that you prefer from

either of the printed test patterns (test pattern

2 or test pattern 3), and set the X and Y coor-

dinates of that color in the following screen.

For a detailed explanation of this procedure, see

"Easy Calibration" on the following page.

How to use the keys in the screen

:Touch the

and

desired color of gray.

Touch the [OK] key.

Your settings will be saved and you will return to

the Color Setting screen. Print a test page as

explained on page 3 and verify that the colors

match the colors in the standard color chart.

MEMO

If you cannot find an acceptable color of

gray in the test patterns, adjust the color

balance using the Color Balance settings

as explained on page 5.

keys to select the