Sharp AR-M161 Manuel d'utilisation - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp AR-M161. Sharp AR-M161 35 pages. Digital multifunctional system

Imprimer la page

BUTTON MANAGER SETTINGS

If you need to configure Button Manager settings, follow the steps below. For details on Button Manager settings,

see Button Manager Help.

Right-click the Button Manager icon

(

) on the task bar and select

[Settings] from the pop-up menu.

The Button Manager settings will open.

If the Button Manager icon does not appear

Note

on the task bar, click the [start] button,

select [All Programs] ([Programs] in other

than Windows XP), select [Sharp Button

Manager G], and then click [Button

Manager] to start Button Manager. The

Button Manager icon appears on the task

bar.

Click the tab that you wish to

configure.

Set up the start-up application in the

"Application Selection" area.

• If the [Show TWAIN setting screen when

Note

scanning] checkbox is selected, the

setting screen will appear when scanning

is executed to let you adjust the scanning

conditions.

• If an application other than [FAX] is

selected, you can select the "File format"

of the scanned image. If [PDF] is selected

for the file format, the image quality may

be slightly degraded.

(page 24)

Select scanning conditions such as

"Color Mode" and "Scanning Side" in

the "Scan Setup" area.

• If you placed a two-sided original in the RSPF,

select [Duplex-Book] or [Duplex-Tablet] as

appropriate for the position of the binding on

the original.

• The name of the tab can be changed. Click the

[Menu Name] button and enter a new name.

After entering a name, click the [Apply] button

or [OK] button. This also changes the scan

destination name that appears on the machine.

(Example: SC1: XXXXX)

• If you selected [Duplex-Book] or

Note

[Duplex-Tablet] from the "Scanning Side"

menu, select "Right Edge Fed First" or

"Leading Edge Fed First" for the

orientation of the original.

• For original sizes for which two-sided

scanning is possible, see "REVERSING

SINGLE PASS FEEDER / SINGLE PASS

FEEDER" in "3. PERIPHERAL DEVICES

AND SUPPLIES" in the "Operation

manual (for general information and

copier)".

• Some settings cannot be selected in

some applications.

• When [Show TWAIN settings when

scanning] is selected, only [Menu name]

can be selected.

Click the [OK] button.

This completes the settings.

SCAN