Sharp AR-M237 IMAGERs Manuel de l'opérateur de la clé - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur de la clé pour {nom_de_la_catégorie} Sharp AR-M237 IMAGERs. Sharp AR-M237 IMAGERs 24 pages. Digital multifunctional imager
Également pour Sharp AR-M237 IMAGERs : Spécifications (2 pages), Manuel de configuration du logiciel (18 pages), Manuel de configuration du logiciel (20 pages), Manuel de référence rapide (39 pages), Manuel de référence rapide (39 pages)
Imprimer la page
GENERAL PROGRAMS
ENERGY SAVE
KEY OPERATOR PROGRAMS
ENERGY SAVE
AUTO POWER SHUT-OFF
AUTO POWER SHUT-OFF TIMER
PREHEAT MODE SETTING
"ENERGY SAVE" provides the following four programs
to reduce your power costs. From an environmental
perspective, this also helps conserve natural
resources and reduce pollution.
G AUTO POWER SHUT-OFF
G AUTO POWER SHUT-OFF TIMER
G PREHEAT MODE SETTING
G TONER SAVE MODE
AUTO POWER SHUT-OFF
If the machine is not used for the amount of time set in
"AUTO POWER SHUT-OFF TIMER", AUTO POWER
SHUT-OFF will activate and switch the machine to a
standby state that conserves the maximum amount of
energy. This program can be used to prevent AUTO
POWER SHUT-OFF from operating. When this is
done, the "AUTO POWER SHUT-OFF TIMER" setting
is disabled. Use this program when circumstances
require that AUTO POWER SHUT-OFF be disabled.
This program is initially enabled (factory default
setting).
Rather than disabling the auto power
Caution
shut-off feature, we suggest that you
first try lengthening the time set in
"AUTO POWER SHUT-OFF TIMER"
In most cases a suitable timer
setting will allow work to proceed
with minimal delay and still enable
you to enjoy the benefits of power
conservation.
AUTO POWER SHUT-OFF TIMER
This program is used to set the amount of time after
which "AUTO POWER SHUT-OFF" activates when the
machine is not used.
This function allows you to reduce power costs, and at
the same time helps conserve natural resources and
reduce pollution.
The time can be set to as long as 240 minutes in
increments of one minute.
The factory default setting is "60" (min.).
• Select a suitable time according to your
Note
pattern of use of the machine.
• If "AUTO POWER SHUT-OFF" is
disabled, the time setting is also disabled.
10
OK
60min
15min
PREHEAT MODE SETTING
If the printer is not used for the length of time set with
this program after printing is finished, it will enter
preheat mode. This function reduces your power
costs, and at the same time helps conserve natural
resources and reduce pollution.
Select the most suitable setting to match your pattern
of use of the printer.
The time can be set to as long as 240 minutes in
increments of one minute. (Preheat mode cannot be
disabled.)
The factory default setting is "15" (min.).
TONER SAVE MODE
The toner save mode will reduce toner consumption by
approximately 10% in the automatic, text, and
text/photo exposure modes. Copies will be lighter but
still adequate for general use. Selection of this mode
has no effect on the photo and super photo modes.
This program is initially disabled (factory default
setting).