Sharp AR-M280N Imager Manuel d'entretien - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sharp AR-M280N Imager. Sharp AR-M280N Imager 40 pages. Laser printer
Également pour Sharp AR-M280N Imager : Brochure & Specs (11 pages)

Imprimer la page
Sharp AR-M280N Imager Manuel d'entretien
Main code 51
51-2
Purpose
Adjustment
Function (Content)
Used to adjust the contact pressure of paper on
the resist roller in each section (machine paper
feed, duplex paper feed, SPF paper feed).
(This adjustment is required when the print
image position varies or when paper jam occurs
frequently.)
Section
Paper transport
(paper exit, switchback, transport)
Item
Operation
Operation/Procedure Perform the resist quantity adjustment.
1) The current set value is highlighted on the
right of each item. In this screen, be sure to
select "1: COPY START." (Set value: 1)
2) Enter the correction value with 10 digit key
pad.
Press P to store the set value.
3) When the value is increased by 1, the resist
quantity is changed by 1ms.
4) Press START to start copying and store the
set value. (Display value: 1)
5) Select a paper feed tray. (Set value 2)
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 0-8, AND PRESS START.
0. TRAY SELECT
1
1.PRINT START
2. TRAY1
50
3. TRAY2
50
5. BPT
50
6. ADU
50
7. SPF(HIGH)
50
8. SPF(LOW)
Select 0 or 1,
and press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. INPUT VALUE 0-99, AND PRESS
START.
1. TRAY1
Select 1, and
press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. NOW PRINTING.
Select 0, and
press [START] key.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 1-15, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
(ABOVE +10: DUPLEX MODE)
4. DESK
50
1
50
Press [CUSTOM SETTING] key.
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOM SETTING] key.
AR-M280U SIMULATIONS 9-3
<List of set values 1>
0 TRAY
Paper feed tray selection (1 - 5)
SELECT
1 PRINT
Copy start (Initial value)
START
2 TRAY1
Tray 1 resist adjustment value
3 TRAY2
Tray 2 resist adjustment value
4 DESK
Desk resist adjustment value
5 BPT
Manual tray resist adjustment value
6 ADU
ADU resist adjustment value
7 SPF(HIGH) SPF resist adjustment value
(High speed)
8 SPF(LOW) SPF resist adjustment value
(Low speed)
<List of display values 1>
Normal display
ERROR display
Door open
Jam
Paper empty
<List of set values 2>
1
TRAY1
2
TRAY2
3
TRAY3
4
TRAY4
5
Manual feed
*
The selected tray is registered as an initial set value in the initial
screen.
Main code 61
61-2
Purpose
Adjustment
Function (Content)
Used to adjust the laser power (absolute value)
in the copy mode.
Section
PCU
Item
Operation
Operation/Procedure Enter the laser power set value in copying,
and press START to store it.
SIMULATION 61-2
LASER POWER SETTING (COPY). SELECT 1-4, AND PRESS START.
1. AE
2. TEXT
5
5
3. MIX
4. PHOTO
5
5
Press [START] key.
SIMULATION 61-2
LASER POWER SETTING(COPY). INPUT VALUE 1-165, AND PRESS START.
1. AE
<List of set values>
1
Auto exposure mode
2
Text mode
3
Text/Photo mode
4
Photo mode
45PPM 28PPM
60
50
50
55
50
60
75
NOW COPYING
DOOR OPEN.
JAM
PAPER EMPTY.
11
TRAY1 with Duplex
12
TRAY2 with Duplex
13
TRAY3 with Duplex
14
TRAY4 with Duplex
15
Manual feed with Duplex
1
Press [CUSTOM SETTING] key
or [START] key.
5
Initial value
Set range
45PPM
100
100 - 150
(45PPM)
35/28PPM
76
76 - 150
45PPM
100
(28/35PPM)
35/28PPM
76
45PPM
100
35/28PPM
76
45PPM
100
35/28PPM
76
35PPM
65
55
55
60
55
60
75