Sharp AR-M316 Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp AR-M316. Sharp AR-M316 48 pages. Digital multifunctional system key operator's guide
Également pour Sharp AR-M316 : Manuel d'utilisation (4 pages), Manuel en ligne (36 pages), Manuel de configuration (20 pages), Manuel de l'opérateur de la clé (24 pages)

BEFORE USING THE NETWORK SCANNER FUNCTION

PROTECTING INFORMATION PROGRAMMED IN THE

WEB PAGE ("Passwords")

Passwords can be established to protect the settings and information stored in the Web page. Note that it is not

necessary to set passwords; the network scanner functionality can also be used without passwords.

A password can be set for the administrator and a password can be set for users. When the Web page is accessed

with the user password, the "Device Setup" and "Network Setup" settings cannot be configured.

Click "Passwords" in the menu frame.

Select the "Enable Password

Protection of this Web Site"

checkbox.

Enter the current password in "Admin

Password".

When establishing a password for the first time,

enter "Sharp" in "Admin Password".

Be sure to enter "S" in upper case and

Caution

"harp" in lower case (passwords are case

sensitive).

Enter passwords in "User Password"

and "Admin Password".

A maximum of 7 characters and/or numbers can

be entered for each password (passwords are

case sensitive).

Be sure to enter the same password in "New

Password" as you did in "Confirm Password".

When you have completed all of the

entries, click "Submit".

The entered password is stored.

After setting the password, turn the machine

power off and then back on.

When a password is set, you will be prompted for the

password when you attempt to access a Web page

with protected settings. For the "User name", enter

"user" if you are accessing the page as a user, or

"admin" if you are accessing the page as an

administrator. For detailed information on setting

passwords, refer to "Help".