Sharp AR-M450 Imager Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp AR-M450 Imager. Sharp AR-M450 Imager 40 pages. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Également pour Sharp AR-M450 Imager : Brochure & Specs (11 pages), Manuel des pièces détachées (30 pages), Manuel d'utilisation (32 pages), Manuel de remplissage (8 pages)

Imprimer la page
Sharp AR-M450 Imager Manuel d'utilisation
NORMAL COPYING

Copying from the document glass

When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the
document cover and copy the originals from the document glass
■ ■ ■ ■ ■ 1-sided copies of 1-sided originals
Original
1
Set an original on the document glass. (page 7)
Original size detector
Original scale
mark
5
1
8
1
/
x
/
2
2
or A5
1
8
14
/ x
2
or B4
or B4
1
8
11 or A4
11x17 or A3
/ x
2
●
Set an original by aligning its corner with the tip of the
scale ( ) mark at the left rear corner of the glass as shown
in the illustrations.
2
Ensure that the 1-sided to 1-sided copy mode
is selected.
ORIGINAL
A4
A4
A4
1.
2.
A4
A3
3.
A4R
4.
12
Copy
Original scale
mark
8
1
/ x
11R or A4R
2
The one-sided to one-sided
mode is selected when no
icon for a two-sided mode
appears in the dashed area
on the display. If the 1-sided
to 1-sided copy mode is
already selected, steps 3 to
5 are not needed.
3
Ensure that paper of the same size as the
original is automatically selected. (✼Note)
AUTO
A4
PAPER SELECT
%
100
COPY RATIO
(✼Note) The following conditions must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or
A5) are set and the auto paper select function is enabled.
PLAIN
1.
A4
2.
A4
TRANSPA
1
X
3.
A3
PLAIN
The selected tray will be
highlighted or the message
"LOAD xxxxxx PAPER." will
appear. If the message
appears, load paper in a
paper tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copying
can be performed onto the
currently selected paper.
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.