Sharp PN-L802B Manuel de configuration - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Sharp PN-L802B. Sharp PN-L802B 28 pages. Touchscreen
Également pour Sharp PN-L802B : Manuel d'utilisation (9 pages), Manuel d'utilisation (48 pages), Manuel de l'utilisateur (13 pages), Manuel de démarrage rapide (1 pages), Manuel de démarrage rapide (1 pages), Manuel de démarrage rapide (1 pages), Manuel de démarrage rapide (28 pages), Manuel de démarrage rapide (1 pages), Manuel de démarrage (24 pages), Garantie (2 pages), Manuel de configuration du logiciel (46 pages), Manuel de connexion (1 pages), Brochure & Specs (4 pages)

Imprimer la page
Sharp PN-L802B Manuel de configuration
• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• This monitor cannot be used in vertical orientation.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 20
degrees upward.
• When moving the monitor, be sure to hold it with either
handles or the corners on the bottom of the unit. Do not
place your hand on the screen. This may cause product
damage, failure, or injury.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
2
[5]
• If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 41°F (5°C) to 95°F (35°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
• Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• Do not use the product in locations where the unit is
exposed to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.
4
E

MOUNTING PRECAUTIONS

Unit: inch [cm]
7-7/8 [20]
1-7/16 [3.5]
2
[5]
2 [5]
• Fix the USB cable with the cable clamp (supplied).
(1) Coil the cable into two loops approx. 1-9/16 inches
(4 cm) in diameter at approx. 5-7/8 inches (15 cm)
from the mini USB connector.
(2) Fix the loops to the fixing part above the USB port with
the cable clamp.
(2)
(1)