Sharp SJ-14T-H2 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp SJ-14T-H2. Sharp SJ-14T-H2 8 pages.

Imprimer la page

INSTALLATION

1.To ensure adequate ventilation for your refrigerator, it is

recommended to provide space of 6 cm on both sides and

at the back, and space of 30 cm above the refrigerator.

Insufficient spacing will decrease the cooling efficiency,

resulting in unnecessary consumption of electricity.

6cm

96 cm

OPERATION

CONTROLLING TEMPERATURES

The refrigerator controls its temperature automatically.

However, if needed, adjust the temperature as follows.

MIN

KNOB

SETTING

OFF

Stop the operation of the

compressor.

When storing a small quantity

MIN

of food and the door is not

opened frequently.

For use in cold season when

the out door temperature is

WARM

comparatively low.

For normal operation.

NORMAL

When storing a large quantity

of food and the door is opened

frequently.

Use in hot seasons.

COLD

When cooling the food quickly

or making ice quickly.

When not required, be sure to

MAX

return the knob to the original

position, otherwise all food

may be frozen.

NOTE:

• The knob cannot be turned beyond-MAX position and

should not be forced beyond this mark.

• When the knob is set at the WARM dew drops may be

formed.

30cm

Adjustable

foot

6cm

MAX

OFF

PURPOSE

2.Using the front Adjustable foot, ensure that the refrigera-

tor is positioned firmly and level on the floor.

3.In order to prevent possible electric

shock, install the grounding wire to the

earth wire connecting screw at the rear

of the refrigerator. (2 pin plug region)

NOTE:

• Keep your refrigerator out of direct sunlight.

• Do not place next to heat generating appliance.

• Do not place directly on the ground. Provide suitable stand.

DEFROSTING

The freezer compartment is required

defrosting operation. When frost

formed with the thickness of 5mm (as

thick as the defrost indicator), the

freezer compartment is required de-

frosting operation.

And water is discharged in the evapo-

rating pan provided above the com-

pressor, and evaporated by the com-

pressor heat.

PROCEDURE

Remove the ice cube tray and food from the freezer

compartment.

Push the defrosting button.

It is recommended to push the defrosting button be-

fore going to bed in order to complete the defrosting

overnight. When 5mm-thick frost builds on the evapo-

rator, defrosting would be complete in about 3-4 hours

(during summer). After completion of defrosting, cool-

ing operation starts automatically.

MIN

OFF

WHEN STOPPING DEFROSTING OPERATION

Turn the control knob to OFF position, and set the con-

trol knob to original position (example: Normal) to start

cooling operation.

NOTE:

Be sure to refrain from taking off the frost sticking to

the evaporator by using a gimlet or a knife.

If the thickness overs the defrost

indicator, defrosted water may

overflow the evaporating pan.

Pay due attention to this regard.

Be careful not to defrost when frozen food is stored

in the freezer compartment, otherwise it will thaw.

Therefore, it is recommended to perform defrosting

when no frozen food is stored.

Screw

Defrost indicator

Defrosting button

Push

MAX

Defrost indicator