Sharp SJ-22G Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp SJ-22G. Sharp SJ-22G 16 pages.

Imprimer la page

Care and cleaning

Important

To prevent cracks on inside surfaces and plastic

components, follow these tips.

• Wipe out food oil adhered to plastic parts.

• Some household chemicals may cause damage, so use

• If undiluted detergent is used or soapy water is not

wiped off thoroughly, it may result in cracks of plastic

parts.

Cleaning

and the door. Wash them by warm soapy dishwashing

water. After that, rinse them in clean water and dry.

Clean the inside with a cloth soaked in warm soapy

soapy water thoroughly.

Wipe the exterior with a soft cloth each time it gets

dirty.

Clean the Magnetic door seal with a toothbrush and

warm soapy dishwashing water.

Note

•

paint, polishing powder, benzine, boiled water, etc.)

which may cause damages.

• If you pull out the power plug once, wait 5 minutes

atleast before connecting the power plug again.

• Do not drop objects inside the refrigerator or strike the

inner wall. This may cause cracks to inner surface.

Before calling for service

Before calling for service, check the following points.

Problem

The outside of the cabinet is

hot when touching.

When there is refrigerator

noise.

Frost or dew appears inside

or outside the refrigerator.

The food in the refrigerator

compartment freeze.

Odors in the compartment.

If you still require service

Refer to your nearest service agent approved by SHARP.

It is normal. The hot pipe is in the cabinet in order to prevent dew generation.

It is normal for the refrigerator to make the following sounds.

• Loud noise is made by the compressor when its operation starts

-- Sound becomes quieter after a while.

• The compressor makes loud noise once a day.

-- Operating sound is made immediately after automatic defrost operation.

•

• Cracking or crunching sound, squeaking sound

-- Sound produced by expansion and contraction of inner walls and internal parts during

cooling.

This may occur in one of the following cases. Use a wet cloth for wiping frost and a dry

cloth for wiping dew.

• When the ambient humidity is high.

• When the door is frequently opened and closed.

•

• Is the refrigerator operated for a long time with the temp. control knob set at MAX?

-- Change the temperature control to other setting.

• If ambient temperature is low, food may freeze even if the the temp. control knob is set

to MIN.

• Wrapping is required for the food with strong odors.

• Deodorizing unit cannot remove all odors.

Defrosting

Defrosting is automatically operated by a unique energy

saving system.

When the compartment light is blown

Contact the service agent approved by SHARP to replace

the light. The light is not to be replaced other than by

Switching off your refrigerator

period, the following steps should be taken to reduce the

1. Remove all food.

2. Remove the power plug from the socket.

3. Clean and dry the interior thoroughly.

4. Keep all the doors open slightly for a few days to dry.

Solution