Sharp SJ-43N-SL1/WH1 Manuel d'entretien - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Sharp SJ-43N-SL1/WH1. Sharp SJ-43N-SL1/WH1 36 pages.
Imprimer la page
SJ-P43N/43N
SJ-P47N/47N
(2)-4. Replace Def. heater ass'y with new one.
Drain support al
(2)-5. Wind the Glass cloth tape (3M: No. 27) to lead wire
of Def. heater ass'y. (2 places)
Def. heater ass'y
+
(40) 50
5
Glass cloth tape
(W40 x L25)
Lead wire
(2)-6. Bend a and b of Drain support al to right angle
(90˚) to set Def. heater ass'y. (Fig. A-24)
This side is longer wire
a
Drain support al
Def.heater ass'y
Heater cover
Def.heater ass'y
Fig. A-22
+ 5
(40)
360
Glass cloth tape
Wind the Glass cloth tape
more than 2 turns.
Fig. A-23
This side is shorter wire
b
Fig. A-24
(2)-7. Stick the longer wire to the Drain support by
aluminum tape (2 pieces), and wind vinyl tape
(2 pieces) to lead wires of Def. heater ass'y by
aluminum tape as shown in Fig. A-25.
Note: Glass cloth tape part shall be both side of Drain
support to protect the lead wire from damaged.
Sec. AA
(2)-8. Set Heater cover on Drain support, and bend top
edge c and d to outside as shown in Fig. A-26.
Drain support al
Heater cover
c
(2)-9. Wind up Leading wire sealer as shown in Fig. A-27
Drain support al
Def.heater ass'y
(2)-10. Set the assembly above on the food liner by fixing
a screw.
24
Glass cloth tape
Glass cloth tape
A
A
[back side]
aluminum tape
(W25 X L40)
Glass cloth tape
Glass cloth tape
[bottom side]
(more than 2 turns)
Fig. A-25
Heater cover
top edge
Def.heater ass'y
Sec. BB
d
Def.heater ass'y
B
B
Fig. A-26
Heater cover
Leading wire sealer
Fig. A-27