Crestron WMKT-4000L Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Crestron WMKT-4000L. Crestron WMKT-4000L 12 pages. Trim ring mount kits

Crestron TMK-4000L & WMKT-4000L
Installation
Installation Guide – DOC. 6302
This section provides an installation procedure for each Trim Ring Mount Kit. The
procedure for the TMK-4000L starts below and the "WMKT-4000L Procedure"
starts on page 4.
TMK-4000L Procedure
The procedure in this section provides the necessary steps for the assembly of the
TMK-4000L to either the PMK-4000L or BB-4000L. It is assumed that the
PMK-4000L or BB-4000L has been secured to the stud according to the procedures
in the latest revisions of their respective Installation Guides (Doc. 6304 and Doc.
6305, respectively). Also, it is assumed that drywall is in place and a rectangular
cutout for the touchpanel is made in the drywall (refer to the Drywall Cutout
dimensions on the previous page for cutout dimensions).
Complete the steps in the order provided. The only tool required and not supplied is
a level.
NOTE: When installing into the PMK-4000L, verify that the 18 AWG bus wire
securing the cables for the touchpanel remains attached.
1. Verify that the rectangular cutout in the drywall is as level as possible.
2. Insert the symmetrical trim ring into the opening, as shown in the
following diagram.
Insert Trim Ring into Opening
TRIM RING
NOTE: The required PMK-4000L or BB-4000L is not shown.
Trim Ring Mount Kits
IMPORTANT:
MAKE DRYWALL CUTOUT AS LEVEL
AND CLEAN AS POSSIBLE. THE TRIM
RING ALLOWS FOR ONLY MINOR
ADJUSTMENT OF THE TPS-4000L
Trim Ring Mount Kits: TMK-4000L & WMKT-4000L • 3