Sharp SJ-X400EM Manuel d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp SJ-X400EM. Sharp SJ-X400EM 20 pages.

Imprimer la page
Sharp SJ-X400EM Manuel d'utilisation

Controlling Temperature

The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
How to check the current temperature
level
The indicator will be "ON " to show the current temperature
level by pressing "R" or "F" button.
Refrigerator compartment : Press "R" button.
Freezer compartment
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
1 .
Press "R" button.
2 .
Press "R" button to change the temperature level.
Freezer compartment
1 .
Press "F" button.
2 .
Press "F" button to change the temperature level.
Advanced Setting of Refrigerator /
Freezer compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level 1 ~ 9) by following steps.
Refrigerator compartment
1 .
Press "R" button first. Hold down "R" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2 .
Press "R" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
1 .
Press "F" button first. Hold down "F" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2 .
Press "F" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
16
: Press "F" button.
Beep
Beep
Beep beep beep
Beep beep beep
•
Temperature indicator changes as the pictures below
(3→4→5→1→2→3) in each case (Refrigerator compartment
/ Freezer compartment) by pressing "R" or "F" button.
Level
1
2
3
<Factory setting>
4
5
NOTE
•
At first, both compartments are set at "Factory setting".
•
After adjusting the temperature level, the indicator will turn off
approximately 5 seconds later.
•
When the operation of refrigerator stops because of power
failure, temperature setting is restarted from the previous
setting at the time of re-power.
•
Temperature indicator changes as the pictures
below (5→6→7→8→9→1→2→3→4→5) in
each case (Refrigerator compartment / Freezer
compartment) by pressing "R" or "F" button.
...
OFF
Level
1
2
3
4
5
<Factory setting>
6
7
8
9
Indicator
...
...
Lighting
Flashing
Indicator