Sharp SJG2254FS Manuel d'utilisation et instructions d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et instructions d'installation pour {nom_de_la_catégorie} Sharp SJG2254FS. Sharp SJG2254FS 24 pages.
Imprimer la page
6. Remove harness clamp with a screwdriver and unplug the
connecting terminal. See Figure 6.
Connecting
Terminal
Figure 6
7. Remove the screws on the left and right slideway supports
Disassembly here
and have one person hold the Flex Drawer door for support.
8. Lift and angle the Flex Drawer door to pull with both hands
to remove.
STAINLESS STEEL COOLING PLATE
1. User a small flat screwdriver tool to pry up a corner of the
cooling plate.
2. Place a hand along the warped gap (wearing work gloves is
recommended) and gently remove the plate. See Figure 7.
Figure 7
Screws
INSTALLATION INSTRUCTIONS
DISASSEMBLY OF PULLOUT DRAWER
1. Open the freezer drawer to the maximum opening.
2. Lift the tail of the pullout drawer by holding both sides of
the drawer with both hands.
3. Pull the slide rails all the way out, and push the pullout drawer
forward until the drawer is separated from the support claws
on the slide rails. See Figure 8.
4. Remove the pullout drawer from the side rails.
DISASSEMBLY OF FREEZER DRAWER
1. Open the freezer drawer to the maximum opening.
2. Lift the tail of the freezer bin by holding both sides of the
bin with both hands.
3. Pull the whole bin toward you until the support claws on the
slide rails are separated from the bin.
4. Remove the freezer bin from the side rails.
5. Remove the screws on the left and right side rails with a
screwdriver and have one person to hold the freezer drawer
door for support. See Figure 9.
6. Lift the door to a certain angle and pull back with both
hands to remove.
9
Pullout Drawer
Figure 8
Freezer Bin
Screws
Figure 9