Sharp Notevision PG-D40W3D Manuel de configuration - Page 31

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Sharp Notevision PG-D40W3D. Sharp Notevision PG-D40W3D 35 pages. True xga/wxga data projectors
Également pour Sharp Notevision PG-D40W3D : Manuel de l'utilisateur (2 pages), Fiche technique (2 pages), Spécifications (2 pages), Brochure & Specs (2 pages)

Imprimer la page

Sharp Notevision PG-D40W3D Manuel de configuration

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program

to send a command to reset the lamp timer. The example below uses Windows

operating system. When you use Windows Vista

referring to the following steps, because Windows Vista

HyperTerminal.

Click "Start" – "All Programs" –

"Accessories" – "Communica-

tions" – "HyperTerminal".

•

If you do not have HyperTerminal installed,

see the operation manual of your computer.

•

Depending on the settings of your computer,

you may be required to enter your area code

and other details. Enter the information as

required.

Enter a name in the "Name" ﬁ eld,

and click "OK".

If you are required to enter the

area code, enter it in the "Area

code" ﬁ eld. From the "Connect

using" drop-down menu, select

"TCP/IP (Winsock)", and click

"OK".

Enter the IP address of the

projector in the "Host address"

ﬁ eld (see "TCP/IP" on the

"Network" menu of the projector),

and enter the data port of the

projector in the "Port number"

ﬁ eld ("10002" is the factory default

setting), and click "OK".

, use other communications program

does not come with

XP as the

Select

"TCP/IP (Winsock)"

-31