Sharp PG-F320W - Notevision WXGA DLP Projector Manuel de configuration - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Sharp PG-F320W - Notevision WXGA DLP Projector. Sharp PG-F320W - Notevision WXGA DLP Projector 34 pages. True wxga data projector
Également pour Sharp PG-F320W - Notevision WXGA DLP Projector : Fiche technique (2 pages), Fiche technique (2 pages)
Imprimer la page
Controlling the Projector via LAN
Confirming the Projector
Status
(Status)
On this screen, you can confirm the projector
status. You can confirm the following items :
MAC Address
• • • • •
Power
• • • • •
Condition
• • • • •
• • • • •
Lamp Timer
Lamp Life
• • • • •
• • • • •
Input
Signal Info
• • • • •
• • • • •
Serial Number
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
projector's operation manual.
-16
Controlling the Projector
(Control)
On this screen, you can perform projector
control. You can control the following items :
• • • • •
Power
Input Select
• • • • •
• • • • •
Volume
AV Mute
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• While the projector is in standby mode, you
can only control "Power ON".
• For details about each item, refer to the
projector's operation manual.