Sharp XV-Z9000U - Vision - DLP Projector Manuel de service supplémentaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de service supplémentaire pour {nom_de_la_catégorie} Sharp XV-Z9000U - Vision - DLP Projector. Sharp XV-Z9000U - Vision - DLP Projector 14 pages.
Imprimer la page
XV-Z9000U/E
SUPPLEMENT
Upgrading from Level-x to Level-c
(No modifications on the hardware)
1) Checking the unit
» Select "STATUS" on the menu screen and look at the right bottom of the screen to check the program
version. If the version is "Z901927", take the following procedures.
2) Jotting down the process parameters.
» Do the same as for the upgrading from Level-z to Level-c.
Select "VIDEO1" on the process menu and write down the "CONTRAST" and "BRIGHT" settings
too.
3) Updating the programs
» Get the following two programs updated:
Main program
CVIC program
Take the same steps as for the upgrading from Level-z to Level-c.
4) Checking and readjusting the process data
» Check the "A/D, DLP and DTV" settings on the process menu.
» Enter the process menu "SSS" and click on "S2".
» Select "VIDEO1" on the process menu. Enter the noted-down values in the "CONTRAST" and
"BRIGHT" settings. There is no need to readjust the other "VIDEO1" settings.
» Enter the process menu "SSS", click on "S4" and exit from this process.
Upgrading the Level-z unit for HTPC compatibility
(No modifications on the hardware)
1) Checking the unit
» Select "STATUS" on the menu screen and look at the right bottom of the screen to check the
program version. If the version is "Z901819" or "Z901905", take the following procedures.
2) Updating the programs
» Get the following program updated:
Main program
Refer to the attachment file "Z9000Manual.doc".
Z9000_020220.bhx
cvic_AB_Z9000_1219al.bhx
Z9KU_011122b.bhx
4