Digital Antenna 4KMR-10A Instructions pour l'utilisateur
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Digital Antenna 4KMR-10A. Digital Antenna 4KMR-10A 2 pages. Wireless mobile repeater
Imprimer la pageDA4000MR
40dB Repeater
DP515
12VDC Power Supply
3) Mount the exterior black magnetic mount antenna (CA55M), on the center of the metal car roof. For a car with a
sunroof, place the antenna on the center of the metal area behind the sunroof. The outside antenna must be placed on
the roof and cannot be located anywhere else on the automobile. Do not place the exterior antenna on the trunk or on
the edge of the vehicle's roof.
4)
Run the cable for the exterior antenna through the weather stripped area of door jam and into the car.
or deform cable.
Connect the outside antenna's mini-UHF male connector to the outside antenna port on the repeater
unit.
5)
After you are certain that all connections are tight and secure, move the repeater's switch labeled "
position. A green light will illuminate indicating that the repeater system is ready for use.
repeater's light is red.
power supply's
built-in microprocessor controller automatically stopped power to the repeater (turned the repeater off) due
to an oscillation (feedback). Please follow troubleshooting guidelines on next page. During normal operation, the lights on
the repeater and the power supply should stay green.
Exterior Antenna with 10' cable
Interior Antenna with 6' cable
DA4000MR Repeater unit
C
2007 Digital Antenna Inc
User Instructions
CA09P
Interior Antenna
If the light on the repeater immediately turns off and the 12VDC power supply flashes red, the
Wireless Mobile Repeater Installation
Instructions
1)
Place the repeater (DA4000MR) in a suitable, dry
CA55M
Exterior Antenna
location in the instrument dash, under seat, or in
trunk and plug the (DP515) power supply's power
cord into the cigarette socket or appropriate power
jack.
The included power supply (DP515) must
be used. DO NOT connect the DA4000MR
repeater unit directly to 12 volts.
2)
Connect the (CA09P) interior slim patch
antenna's mini-UHF male connector directly to the
DA4000MR's inside antenna port connector. The
inside antenna must operate in a vertical position.
Attach the inside antenna adhesive side to a non-
metal surface on the automobile's center console.
Do not place the interior antenna onto the
windshield or windows.
be placed onto the right side of the driver's headrest
with an elastic band.
Model # 4KMR-10A
Wireless Mobile Repeater
The interior antenna can
DO NOT crush
on/off
" to the on
NEVER operate if the