Shimano 105 FC-R7000 Manuel du distributeur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano 105 FC-R7000. Shimano 105 FC-R7000 21 pages. Front chainwheel
Également pour Shimano 105 FC-R7000 : Manuel du distributeur (21 pages)
Imprimer la page
TO ENSURE SAFETY
For Installation to the Bicycle, and Maintenance:
• When installing the pedals, apply a small amount of grease to the threads to prevent the pedals from sticking. Use a torque wrench to securely tighten
the pedals. Tightening torque: 35 - 55 N·m. The right-hand crank arm has a right-hand thread, and the left-hand crank arm has a left-hand thread.
• If the bottom bracket shell is not parallel, gear shifting performance will drop.
• If the chain keeps coming off the gears during use, replace the gears and the chain.
• When installing the left and right adapters, apply grease and be sure to install the inner cover. Otherwise the waterproofing performance will worsen.
• To ensure the best performance, be sure to use only the specified type of chain.
Front chainwheel
FC-R9100
FC-R8000
FC-R7000
• If a squeaking noise is heard coming from the bottom bracket axle and the left crank arm connector, apply grease to the connector and then tighten it
to the specified torque.
• If you feel any looseness in the bearings, the bottom bracket should be replaced.
• Be sure to use the specified gear tooth combination. If an unspecified gear is used, the chain may fall in between the gears, damaging them.
FC-R9100
42T-MX
39T-MW
Low
36T-MT
34T-MS
FC-R8000
39T-MW
Low
36T-MT
34T-MS
FC-R7000
39T-MW
Low
36T-MT
34T-MS
The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using
the product.
Recommended chain
CN-HG901-11
CN-HG701-11
CN-HG601-11
55T-MX
54T-MX
X
X
-
-
-
-
-
-
53T-MW
52T-MT
X
-
-
X
-
-
53T-MW
X
-
-
6
Top
53T-MW
52T-MT
-
-
X
-
-
X
-
-
Top
50T-MS
-
-
X
Top
52T-MT
-
X
-
50T-MS
-
-
-
X
46T-MT
-
X
-
50T-MS
-
-
X