Shimano BR-M6000 Manuel du distributeur - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano BR-M6000. Shimano BR-M6000 39 pages. Hydraulic disc brake
Également pour Shimano BR-M6000 : Manuel du distributeur (39 pages)

Imprimer la page

MAINTENANCE

Replacing the brake hose

Brake lever side

If there is a marking as shown in the illustration, refer to the "How to replace the brake hose (easy hose joint

system)" section of General Operations.

(A)

(z)

To be continued on next page

Use a utility knife or other cutting tool

to cut the brake hose.

(z)

In order to check that the ends of the

(A)

brake hose are fitted securely into the

base of the brake hose mounts of the

brake calipers and brake lever, make

marks on the brake hose beforehand as

shown in the illustration.

(As a guide, the length of brake hose

inside the mount should be

approximately 11mm, measured from

the cut end of the brake hose.)

(z)

NOTE

90°

Approx. 11mm

Mark

NOTE

Use the utility knife safely and correctly in

accordance with its instruction manual.

TECH TIPS

If you are using TL-BH62, refer to the manual

accompanying the product.

(A)

Mark