Shimano BR-M8000 Manuel du distributeur - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano BR-M8000. Shimano BR-M8000 39 pages. Hydraulic disc brake
Imprimer la page
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
(B)
(C)
4
(D)
Once there are no more air bubbles in the oil in the funnel, close the bleed screw
temporarily. Remove the syringe while covering the end of the syringe tube with a waste
cloth to prevent oil from spattering.
5
To be continued on next page
Fill the syringe with sufficient oil.
Attach the adapter provided with this
product or Shimano original tool to the
end of the tube, connect the tube to the
bleed boss, and fasten it with the tube
holder so that the tube will not be
disconnected.
Loosen the bleed screw by 1/8 of a turn
to open it.
(A)
Push the piston of the syringe to add oil.
The oil then starts coming out from the
oil funnel.
Continue adding oil until there are no
more air bubbles mixed in with the oil
that is coming out.
25
(A)
Tube holder
(B)
Bleed screw
(C)
Bleed boss
(D)
Adapter
NOTE
Secure the brake caliper in a vise to prevent
the tube from being accidentally
disconnected.
NOTE
Do not depress and release the lever
repeatedly.
Oil without air bubbles may come out as a
result of such operation, but air bubbles may
remain in the oil inside the brake caliper, and
it will take longer to bleed the air. (If you
have depressed and released the lever
repeatedly, drain out all of the oil and then
add oil again.)