Shimano CLARIS ST-R2030 Manuel du distributeur - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel du distributeur pour {nom_de_la_catégorie} Shimano CLARIS ST-R2030. Shimano CLARIS ST-R2030 48 pages. Shifting lever
Imprimer la page
MAINTENANCE
Disassembling the bracket body and lever body
MAINTENANCE
Disassembling the bracket body and lever body
[1]
1
(A)
(z)
(B)
2
First use the Shimano original tool (sold
(y)
separately) to remove the E-ring.
[2]
[A]
Use part [B] of the Shimano original
E-ring removal tool [2] to align the E-ring
with the direction of removal.
Next, set part [A] against the E-ring and
remove the E-ring.
[B]
Insert a hexagon wrench or similar tool
(A)
into the lever axle hole, tap it gently
with a plastic mallet to push out the
lever axle, which disassembles it into the
bracket body and the lever body.
(y)
Shimano original E-ring removal
tool:
[1] Y6RT66000
[2] Y6RT68000
(z)
E-ring removal direction
20
(A)
E-ring
CAUTION
When you remove the E-ring, it may pop out;
wear protective glasses while removing it.
Check that there is no one and nothing
around you before starting the removal.
TECH TIPS
The illustration is of the right-hand lever.
(A)
Hexagon wrench
(B)
Plastic mallet
NOTE
Always be sure to remove the lever axle in this
direction. If it is removed in the opposite
direction, it may damage the bracket body.