Shimano E6000 Series Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Shimano E6000 Series. Shimano E6000 Series 47 pages. Total electric power system
Également pour Shimano E6000 Series : Manuel de l'utilisateur (38 pages)
Imprimer la page
Specifications
Operating temperature
range: During discharge
Operating temperature
range: During charging
Storage temperature
Storage temperature
(Battery)
Charging voltage
Charging time
* The range of the assist function speed is different depending on the specifications.
DU-E6000, E6001, E6010: 25km/h or less
DU-E6050: 20mile/h or less
Method of use
INTRODUCTION
You cannot use the battery immediately after shipment.
The battery can be used after charging it with the designated charger.
Be sure to charge it before use. The battery can be used when the LED on it lights up.
Charging the battery
DANGER
• Use the battery and charger combination specified by the company for charging and follow the charging conditions specified by the
company. Not doing so may cause overheating, bursting, or ignition of the battery.
• When removing the battery charger power plug from the outlet or the charging
plug from the battery, do not pull it out by the cord.
• When charging the battery while it is mounted on the bicycle, be careful not to
trip over the charger cord or get anything caught on it. This may lead to injury or
cause the bicycle to fall over, damaging the components.
If the bicycle is stored for an extended period of time immediately after purchase,
you will need to charge the battery before using the bicycle. Once the battery is
charged, it starts to deteriorate.
-10 – 50˚C
0 – 40˚C
-20 – 70˚C
-20 – 60˚C
100 – 240 V AC
< SM-BCE60 >
About 4 hours
< EC-E6000 >
100% charged: About 4 hours
80% charged: About 2 hours
CAUTION
Battery type
Nominal capacity
Rated voltage
Drive unit type
Motor type
Rated drive unit power
8
Lithium ion battery
11.6 Ah
36 V DC
Midship
Brush-less DC
250 W