Shimano E6000 Series Manuel de l'utilisateur - Page 44
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Shimano E6000 Series. Shimano E6000 Series 47 pages. Total electric power system
Également pour Shimano E6000 Series : Manuel de l'utilisateur (38 pages)
Imprimer la page
Symptom
The battery cannot be
removed.
The battery cannot be
inserted.
Fluid is coming out from the
battery.
An abnormal odor can be
detected.
Smoke is coming out from
the battery.
Lights
Symptom
The front light or the tail
light does not illuminate
even when the switch is
pressed.
Cycle computer
Symptom
The cycle computer is not
displayed when you push
the battery power button.
<SC-E6010>
The system does not start
up when you press and hold
the cycle computer power
button for 2 seconds.
Cause / Possibility
Cause / Possibility
The E-tube Project settings may be wrong.
Cause / Possibility
The amount of battery charge may be
insufficient.
Is the power turned on?
Is the battery charging?
Is the cycle computer correctly installed to
the bracket?
Is the electric wire connector correctly
installed?
A component that the system cannot
identify may be connected.
Did you use the cycle computer in, or
expose it to, low temperatures for an
extended period?
Is the cycle computer correctly installed to
the bracket?
Contact the place of purchase.
Contact the place of purchase.
Contact the place of purchase.
Stop using the battery immediately and
contact the place of purchase.
Stop using the battery immediately and
contact the place of purchase.
Contact the place of purchase.
Recharge the battery, and then turn the
power on once more.
Hold down the power button to turn on
the power.
The power cannot be turned on while the
battery is mounted on the bicycle and
being charged. Stop charging.
Install the cycle computer correctly while
referring to "Installing and removing the
cycle computer".
Check to see if the connector of the electric
wire connecting the motor unit to drive
unit is not disconnected. If you are not
sure, contact the place of purchase.
Contact the place of purchase.
The cycle computer may become unable to turn
on if used in, or exposed to, low temperatures
for an extended period. Turn it on by pressing
the power button on the battery. If it still does
not turn on, consult a dealer.
Install the cycle computer correctly while
referring to "Installing and removing the
cycle computer".
42
Remedy
Remedy
Remedy