Accutone BT1000 Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Accutone BT1000. Accutone BT1000 2 pages. For business with noise-cancelling microphone

Imprimer la page

BT1000

Bluetooth Headset for Business

with Noise-Cancelling Microphone

Main Interface & Functions

Interface & Controls

1. Metallic Headband

2. Vol Up (+) Button

3. Multi-Function Button

4. Vol Down (-) Button

5. Micro-USB Charging Jack

6. Rotatable Mic Boom

7. Bendable Mic Boom

8. LED Indicator

9. Foam Ear Cushion

10. NC Microphone Chamber

11. Bluetooth Pairing Button

12. Adapter LED Indicator

Connection & Installation

A. Universal BT Audio Adapter

1. The adapter that comes with the box has been pre-paired

with this particular BT1000 headset.

2. There is no need to pair the headset unless the headset fails

to connect.

3. If your device (ie. Notebook, Smartphone, Tablet or TV box)

comes with bluetooth connection, ALWAYS use the device's

default connection, do not connect the BT Audio Adapter if

your device has bluetooth inbuilt.

B. Setup

If you are certain your host device does not come with

bluetooth connection:

1. Connect the BT Audio Adapter to any USB port of your

computer/device.

2. The Adapter LED Indicator will immediately light up blue

with slow blink, indicating Paired and Online.

3. Turn on your BT1000 headset by pressing and holding the

Multi-Function Button for 2 seconds.

4. The headset's LED Indicator will lit blue blinking twice every

2 seconds, also indicating Paired and Online.

5. Make sure your computer's audio device is "USB Audio

Device".

C. Pairing

1. If you are replacing a new headset OR for some reason your

headset no longer connects to the adapter, press and hold

Bluetooth Pairing Button for 5 seconds until the Adapter

LED Indicator flashes quickly, indicating Pairing Mode.

2. Press and hold the Multi-Function Button for 5 seconds

until LED Indicator flashes quickly red and blue.

3. When you see the headset flashing red and blue rapidly, it

indicates the headset is now in pairing mode.

4. Make sure the LED Indicator on the adapter is still flashing

blue quickly.

5. Wait for about 30 seconds until the units paired, it may take

longer if you are surrounded by various wireless devices like

wireless routers, computers, smartphone or tablets. Try to

turn off bluetooth on your other devices if this process takes

too long.

6. Once the LED Indicator on the adapter flashes slowly AND

the LED on the headset switches back to flashing blue only,

the devices are paired.

7. Pairing completes.

D. Pairing Headset to Other Devices

First of all, switch your BT1000 headset into pairing mode.

Follow the same steps as above, pressing the Multi-Function

Button for 5 seconds until the LED Indicator flashes red and

blue quickly.

For Smartphones & Tablets under iOS

- Go to the settings page, select bluetooth, under Other

Devices, select "BT1000", wait for it to connect, and lists

under My Devices.

For Smartphones & Tablets under Android

- Go to the settings page, select bluetooth, under Available

Devices, select "BT1000", wait for it to connect, and lists

under Paired Devices.

User Manual