Digital Audio Labs livemix LM-DANTE-EXP2 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Audio Labs livemix LM-DANTE-EXP2. Digital Audio Labs livemix LM-DANTE-EXP2 14 pages. Dante option card for mix-16/mix-32

Imprimer la page

CONNECTING TO DANTE NETWORK WITH A SWITCH

If you have multiple Dante devices like a digital console and a digital snake, you will want to use a

Gigabit switch to connect Livemix to the Dante network. Most standard off the shelf Gigabit switches

will work with Dante, provided they meet the Quality of Service (QOS) requirements. For more

information, please reference the Dante FAQ on the Audinate website (www.audinate.com).

1. Connect a CAT5e or CAT6 network cable to the PRIMARY Ethernet connector on the Dante

option card.

2. Connect the opposite end to an open port on the Gigabit switch.

3. Connect other Dante enabled devices to the Gigabit switch in the same manner.

4. Optimize the switch for your Dante network. Consult the Audinate website or the website of the

device you will use to transmit onto the Dante network for more information. In general, you will

need to disable the Energy Effiicient Ethernet (EEE) if your switch has that feature.

CONNECTING TO A REDUNDANT DANTE NETWORK WITH A GIGABIT SWITCH

To configure a Redundant Dante network, you will want to use a second Gigabit switch to connect

Livemix to the Redundant Dante network. Most standard off the shelf Gigabit switches will work with

Dante, provided they meet the Quality of Service (QOS) requirements. For more information, please

reference the Dante FAQ on the Audinate website (www.audinate.com).

1. Connect a CAT5e or CAT6 network cable to the SECONDARY Ethernet connector on the Dante

option card.

2. Connect the opposite end to an open port on the second Gigabit switch.

3. Connect other Dante enabled devices to the Gigabit switch in the same manner.

4. Optimize the switch for your Dante network. Consult the Audinate website or the website of the

device you will use to transmit onto the Dante network for more information. In general, you will

need to disable the Energy Effiicient Ethernet (EEE) if your switch has that feature.

5. The LM-DANTE-EXP2 card comes preconfigured in Switched mode. To change this mode to

Redundant, use your PRIMARY Dante Network and Dante Controller (on a computer), select the

MIX-16/32 Dante card, click Device View, go to the Network Config tab and choose Redundant.

MORE INFORMATION ON SETTING UP A DANTE NETWORK:

For more detailed information on switches and setting them up, please visit

Audinate's Dante Setup pages here:

https://www.audinate.com/training-and-tutorials

LIVEMIX DANTE OPTION CARD (LM-DANTE-EXP2)