Crestron FlipTop FT2 Series Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Crestron FlipTop FT2 Series. Crestron FlipTop FT2 Series 11 pages. Ac power outlet modules
Également pour Crestron FlipTop FT2 Series : Démarrage rapide (2 pages), Démarrage rapide (2 pages), Manuel de démarrage rapide (11 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (9 pages), Manuel de démarrage rapide (9 pages), Manuel de démarrage rapide (11 pages), Pour commencer (2 pages), Pour commencer (2 pages), Pour commencer (2 pages), Manuel (2 pages), Manuel (2 pages), Manuel (2 pages), Manuel de démarrage rapide (7 pages), Manuel de démarrage rapide (8 pages), Démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages)

FT2-500-ELEC-PTL

FlipTop™ FT2 Series Cable Management System, 500 Size, Electrical, Pass-Through Lid

Connect the FlipTop Assembly

Access the two network connectors and two power bus barrel jacks on

the underside of the FT2 assembly.

Connect the Network

Automate the one-touch retractors by connecting all retractors in an

FT2 assembly to a control system and a switch, or to a DMPS via a single

Cresnet® cable. Custom programming can trigger the retractors after

five minutes of no video detected.

Connect the FT2 assembly to a Crestron control system or DMPS3 via

the 3-pin connector using standard Cresnet cable. The red power lead is

not connected and should be terminated.

Connect and Place the Power Supply

The FT2-500-ELEC-PTL ships with one 24VDC power supply that is used

to supply power to the power bus in the FT2 assembly. There are six

possible locations to attach the power supply. Connect the power supply

prior to installing any modules.

NOTE:

Two power supplies are required if installing two rapid charging

modules in the FT2-500-ELEC-PTL. For more information, refer to the

FT2A-CHGR-USBA-BASIC Quick Start Guide (Doc. 8423)

FT2A-CHGR-USBA/C Installation Guide

Quick Start

(Doc. 8219).