Digital Check SB1000 Manuel d'installation facile
Parcourez en ligne ou téléchargez le pdf Manuel d'installation facile pour {nom_de_la_catégorie} Digital Check SB1000. Digital Check SB1000 1 pages. Sb series
Également pour Digital Check SB1000 : Manuel de l'utilisateur (16 pages)
Imprimer la page
Step #1: Check Scanner Components
SB Scanner scanner (either SB500, 600 or
1000).
USB 2.0 Cable.
Travel Pouch (SB500/SB600 only).
Scanner Stand (SB600 only).
Calibration Card.
SB1000
SB500
SB600
Step #2: Install Scanner Drivers
Install the scanner drivers per your
application instructions or if directed to
do so, from the enclosed CD.
connect the scanner to the PC before
loading the drivers.
®
SB
SCANNERS
Optional Drivers, User Manual, Product Literature
Digital Check Corporation
North eld, IL 60093
847-446-2285
Once the drivers have been loaded onto
your laptop or PC, plug in the USB cable
to the scanner and to the PC and launch
your scanning application.
cable for the SB1000 is located in back of
the scanner.
USB Port
SB500 &
SB600
Power port
(optional power
supply sold separately)
SB1000
Step #3: Calibrate the Scanner
SB scanners must be calibrated to each
laptop or PC on which it is operated at the
initial istallation of the device. Follow the
Note: Do not
screen prompts after the application is
launched. To calibrate the scanner, place
the calibration card into the scanner with
the arrows on top and pointed in toward
the scanner as shown.
Note: the USB
You are now ready to scan. Follow the
application instructions as to which
direction and orientation to feed the check
or document.