Digital Devices Octopus Net Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Digital Devices Octopus Net. Digital Devices Octopus Net 8 pages.

Addition to the Octopus Net manual - Octopus NET Mini ITX

6. Installation

The Octopus Net mini ITX board is delivered pre-assembled on the mini ITX base frame. To mount the

base plate in a suitable mini ITX enclosure, the Octopus Net board must be dismantled with 3 screws

to access the hidden fourth fastening point. Once the board has been removed, the base plate can be

properly mounted in the enclosure using the enclosed screws at the 4 fastening points (black

arrows). Finally, the Octopus Net board is mounted back onto the base plate (green arrows).

Octopus Net mini ITX board on base frame

The DuoFlex Twin-Tuner is installed as follows. The slot cover is removed from the Twin-Tuner by

loosening the two screws and is no longer needed. The two screws, on the other hand, are used to fix

the Twin-Tuner to the mounting bridge (green arrows). These fastening steps must be repeated for

each Twin Tuner.

The two black arrows mark the position of the enclosed fastening screws for the fastening bridge to

the base frames. The power supply for the DuoFlex modules or the Max S8/SX8/A8(i)/M4 card is

provided directly from the mainboard to the respective extension. The ribbon cables still required for

the extension and included with the respective extension. Special lengths of data cable can be

ordered as optional accessories.

24. Mai 2017