Digital Electronics /PS-3711A Series Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Digital Electronics /PS-3711A Series. Digital Electronics /PS-3711A Series 8 pages. Ssd unit
Également pour Digital Electronics /PS-3711A Series : Manuel d'installation (13 pages)

Imprimer la page

When attaching the HDD/SSD

to the PS-3711A

(1) Place the PS-A unit face down and

unscrew eight (8) attachment screws.

(See diagram).

(2) Lift the PS-A unit's Rear Cover off of the

PS-A unit.

As for AC type, remove the power cover

as shown below.

PS-A unit's Rear Cover

(3) Insert the HDD/SSD unit cable

connector completely into the IDE I/F.

Attach the HDD/SSD unit using four (4)

attachment screws.

The torque should be 0.5 to 0.6 N·m.

(4) Replace the PS-A unit's Rear Cover and

reattach eight (8) attachment screws.

As for AC type, replace the power cover

and reattach the screws.

The torque should be 0.5 to 0.6 N·m.

IDE I/F