Digital Electronics PS-2000B Series Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Digital Electronics PS-2000B Series. Digital Electronics PS-2000B Series 16 pages. Windows xp multi language preinstalled hard disk unit

Imprimer la page

Hardware Setup

The HDD unit's installation and system data settings are as follows.

1) Install the HDD unit in the PS-B. Refer to 2 Installation for details. If the

HDD unit is already installed, this step is not necessary.

2) Connect a Display and PS/2 keyboard to the PS-B.

• Use a display with SVGA (800 x 600) or more resolution and 16 bit

color or more.

3) Turn on the PS-B unit's power supply and use the following steps to set up

the system data and recognize the HDD unit.

• Normally, use the factory (initial) settings.

• Your PS-B unit's system data screen menus may differ slightly from

these due to installation of newer software.

• The following explanation uses the PS-B unit's factory settings.

4) When the start-up screen appears, press your PC's [F2] key to go to the

BIOS Setup Screen. In the Setup Screen, select [Standard CMOS Features],

then select [IDE Primary Master]. The following screen will appear.

IDE HDD Auto-Detection

IDE Primary Master

Access Mode

Capacity

Cylinder

Head

Precomp

Landing Zone

Sector

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults

5) Confirm whether "AUTO" is selected for IDE Primary Master. Also, confirm

whether "AUTO" is selected for the [Access Mode]. If AUTO is not selected,

change these settings to AUTO with the + or - key. If AUTO is selected in

both, disk parameters will be automatically read when the PS-B is turned ON.

The factory setting is AUTO and recommended for most users.

6) After all changes are made, press the ESC key and select [Save & EXIT Setup]

to save the settings. The OS will then start.

Phoenix- AwardBIOS CMOS Setup Utility

IDE Primary Master

[Press Enter]

[Auto]

0 MB

Menu Level

To auto-detect the

HDD's size, head...on

this channel

F7:Optimized Defaults

-11-

Item Help